Audio - Z Systems, inc.

Sigma 1×6 High Performance Modular Balanced Analog Audio DA – USED

Rachel Weber — Wed, 23 Oct 2024 21:39:59 +0000

Sigma 1×6 High Performance Modular Balanced Analog Audio DA – USED

**Note: This is a used item and in good condition.

Number of Inputs: 1
Number of Outputs: 6
Input Impedance: 30 kohms
Input Gain Range: -9 to +27 dB
Input Connectors: Pluggable Terminals
Bandwidth: 150 kHz
THD & Noise: 0.005 % (20 Hz to 20 kHz)
Hum & Noise: -90 dBm (@ unity)
Freqency Response: 0.2 dB to 100 kHz
Output Impedance: 150 ohms

If you have questions about this product, contact us at sales@zsyst.com or give us a call at (952)974-3140.

For more products, visit our shop!

The post Sigma 1×6 High Performance Modular Balanced Analog Audio DA – USED appeared first on Z Systems, inc..

Symetrix XIN 4 Audio Input Dante Expander for Symetrix Systems 4 Mic or line – OPEN BOX

Rachel Weber — Thu, 19 Sep 2024 17:55:42 +0000

Symetrix XIN 4 Audio Input Dante Expander for Symetrix Systems 4 Mic or line – OPEN BOX

**Note: Open Box, but new unit. Perfect condition.

The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement

to use third-party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space. Optional 1U rack tray and 1/2U surface mount bracket are available for separate purchase.

Features:

Audio input (A/D) expander for Symetrix systems that capitalizes on the surplus DSP of a Dante enabled Symetrix DSP unit to bring overall system costs down.
4 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Radius, Edge, and Prism DSPs.
Configured with Symetrix Composer. No third-party software, archaic DIP switches, or complicated front panel menus.
Network audio expansion using Dante protocol over standard IT networks. Ultra-low latency.
PoE Injector included.
Optional 1U rack tray and 1/2U surface mount bracket available for separate purchase

If you have questions about this product, contact us at sales@zsyst.com or give us a call at (952)974-3140.

For more products, visit our shop!

The post Symetrix XIN 4 Audio Input Dante Expander for Symetrix Systems 4 Mic or line – OPEN BOX appeared first on Z Systems, inc..

Blackmagic Design Audio Monitor 12G G3

Rachel Weber — Tue, 23 Apr 2024 21:22:26 +0000

Blackmagic Design Audio Monitor 12G G3 Rackmount Audio Monitor – 10G Ethernet / SMPTE-2110 Input

The amazing audio meters on Blackmagic Audio Monitor 12G have real analog style ballistics that correctly conform to audio meter standards. The secret is that each audio meter segment has an independent RGB LED which can be changed to any color required for different meter standards. Plus each segment is independently machined and isolated, so no light bleeds between segments. The meters can be changed between VU -20dBFS and -18dBFS, PPM EBU -20dBFS and -18dBFS, PPM BBC -20dBFS and -18dBFS, Loudness EBU +9 and +18 plus Loudness in K-weighting LUFS +9 and +18 scale.

The front panel of Blackmagic Audio Monitor 12G includes a range of controls. Plus, customers get more than audio monitoring because the built in LCD lets customers monitor the 12G-SDI and 2110 IP video inputs. The LCD features additional status such as the input type selected, the video standard and the selected embedded audio pair from the video input.

The HDMI output lets customers use a large screen TV or a computer monitor as a broadcast monitor. The HDMI output is converted from the currently selected input, either 12G-SDI or the 2110 IP video inputs. There’s even a 12G-SDI loop output, which also outputs the current selected video input. This means the SDI loop output can include video from either the SDI or 2110 IP video inputs. Plus customers can monitor all embedded audio pairs from the video inputs.

Blackmagic Audio Monitor 12G de-embeds audio from all SD, HD and Ultra HD video standards. This means it’s perfect for connecting to existing SDI broadcast equipment to new 2110 IP based systems. In high definition, Blackmagic Audio Monitor 12G supports all 720p video standards up to 720p60, all 1080 interlaced standards up to 1080i60 and all 1080p standards up to 1080p60. In Ultra HD customers get all video standards up to 2160p60.

If you have questions about this product, contact us at sales@zsyst.com or give us a call at (952) 974 3140

For more products, visit our shop!

The post Blackmagic Design Audio Monitor 12G G3 appeared first on Z Systems, inc..

Shure SCM262 Stereo Microphone Mixer – OPEN BOX

Rachel Weber — Tue, 05 Dec 2023 22:14:59 +0000

Shure SCM262 Stereo Microphone Mixer

**Note: Open Box, but new unit. Perfect condition.

The Shure SCM262 Stereo Microphone Mixer resembles a field mixer, but is in fact a compact mixer intended for sound reinforcement. The mixer features 2 balanced XLR microphone inputs, a 1/4″ Phone line input, and 3 RCA phono line level inputs. There are stereo 1/4″ phone and stereo RCA jacks on the output stage as well.

The SCM262’s multi-function DIP switches allow the user to customize the mixer for use in a variety of applications. Some of the functions include “Juke Box Muting” and “Paging with Ducking”. The “Juke Box Mute” feature mutes background audio signal when a connected juke box is active. The SCM268 also features “paging with ducking”. This allows the SCM268 to be used as a paging mixer. Background audio level is automatically reduced when paging microphones are active.

Quality Inputs and Outputs

There are 2 balanced XLR Mic inputs and a 1/4″ Phone line input. Balanced stereo (L/R) 1/4″ TRS Phone outputs are also featured for maximum gain and low noise floor.

Multi Function Dip Switches

The SCM262 features multi function DIP switches allowing the user to customize the mixer for use in a variety of applications. Some of the functions include “Juke Box Muting” and “Paging with Ducking”.

Paging With Ducking

This feature allows the SCM262 to be used as a paging mixer. Signal from the paging microphone is passed while simultaneously reducing the level of background music. Perfect for restaurants, bars, schools office settings etc.

Juke Box Mute Feature

The Juke Box Mute feature allows the SCM262 to integrate perfectly with external Juke Boxes. Signal from a Juke Box automatically mutes existing (background) audio. Those inputs remain muted for 30 seconds after the song has ended so that the following song can play without interruption.

Stereo Line Inputs

There are three RCA stereo inputs (L/R) for interfacing with consumer audio devices such as Stereo Systems, CD Players VCR’s etc.

Compact Design

The compact rugged enclosure allows users to transport the SCM262 with confidence.

If you have questions about this product, contact us at sales@zsyst.com or give us a call at (952)974-3140.

For more products, visit our shop!

The post Shure SCM262 Stereo Microphone Mixer – OPEN BOX appeared first on Z Systems, inc..

Williams Sound FM ADA KIT 1 FM ADA Compliance Kit – OPEN BOX

Rachel Weber — Tue, 05 Dec 2023 18:45:41 +0000

Williams Sound FM ADA KIT 1 FM ADA Compliance Kit – OPEN BOX

Important Note: This is an open box item.

The FM ADA KIT 1 FM ADA Compliance Kit from Williams Sound is a portable, all-in-one ADA compliance kit that meets the requirement set by the Americans with Disabilities Act that public facilities must provide equal access to people with disabilities, including those who are hard of hearing. The kit includes everything you need to accommodate 2 individuals for hearing accessibility in a small group setting.

The system includes a PPA T27 transmitter, which can be placed virtually anywhere thanks to its compact design. It accepts mic and line level audio signals via 3.5mm and RCA connectors, and provides a transmission distance of up to 500′ by using FM wireless technology. The PPA R37 beltpack receivers are compact and ergonomic, and can be clipped to a belt or slipped into a pocket for convenient use. The receivers can be used with the included earphones, or with the induction neckloops for users with T-switch hearing aids. Four AA alkaline batteries are included for the receivers. An ADA plaque is also included, which can be applied to a wall so that people can see that you have assistance available for the hard of hearing.

Williams Sound PPA-T27 Compact Base Station FM Transmitter

If you’re looking for an FM transmitter to use with your Williams Sound assistive listening device, consider the PPA T27. This compact base station transmitter pairs with Williams Sound PPA R37 or PPA R38 receivers to broadcast clear sound. As long as you have a compatible Williams Sound receiver, you can use this transmitter in movie theaters, classrooms, houses of worship, and more.

The transmitter accepts audio via the RCA line input jack or 3.5mm mic jack, and transmits the audio over an FM radio signal to any separately available, compatible Williams Sound receiver, as long as it is tuned to the same frequency as the transmitter.

The compact size of the transmitter allows you to place it virtually anywhere, and it’s designed to be easily used by anyone. An LED display shows the frequency, and a handy level adjustment control is located on the front panel for setting the audio level. Frequency selector buttons let you set the operating frequency at one of 17 steps between 72.1 and 75.9 MHz. The included antenna sits neatly on top of the transmitter and provides transmission distances of up to 500′.

Compact base station transmitter can be placed virtually anywhere in a theater, classroom, auditorium, and more
Accepts mic and line level audio signals via the 3.5mm and RCA connectors
Transmission range of up to 500′ with included antenna
FM transmission on one of 17 easily selectable channels
Easy-to-use interface with a large LCD screen

Williams Sound PPA R37 N Select Channel FM Receiver (No Earphone/Batteries)

The PPA R37 N Select Channel FM Receiver (No Earphone/Batteries) from Williams Sound is a compact and easy-to-use beltpack receiver that allows you to listen to an FM signal in the 72-76MHz band. The receiver offers seek button channel selection between 17 pre-set frequencies, which are digitally synthesized for terrific audio clarity and signal stability. It also features a channel lock capability to prevent accidental changes.

The receiver has an ergonomic design with a detachable belt clip, allowing you to slip it into your pocket or conveniently clip it to your clothing. The standard-sized 3.5mm headphone jack is compatible with mono and stereo headphones and earphones, and also supports induction neckloops and telecoil-equipped hearing aids. The receiver operates on a pair of standard alkaline AA batteries (sold separately). A sleep mode helps to preserve battery life.

Ideal for assisted listening applications in schools, houses of worship, auditoriums, theaters, and more
Compact and easy-to-use design allows you to listen to an FM signal in the 72-76MHz band
The receiver’s seek button lets you choose between 17 pre-set frequencies, which are digitally synthesized for terrific audio clarity and signal stability. The channel lock capability prevents accidental changes to channel settings
The ergonomic design and detachable belt clip allow you to slip it into your pocket or conveniently clip it to your clothing
The standard-sized 3.5mm headphone jack is compatible with mono and stereo headphones and earphones, and also supports induction neckloops and telecoil-equipped hearing aids
Operates on a pair of standard alkaline AA batteries (sold separately). A sleep mode helps to preserve battery life

Williams Sound EAR 013 Single Mono Earbud

The Williams Sound EAR 013 Single Mono Earbud is ideal for use with bodypack receivers as part of assistive listening or tour guide systems. The foam earpad provides comfort, while the 39″ cord provides plenty of slack. The standard 3.5mm mono plug is compatible with a wide variety of devices.

Fits in the outer part of the ear
Excellent sound quality
1/8″ mono plug
39″ cord
Monoaural
32 Ohms
Recommended for FM receivers and select IR receivers
Designed for individuals with mild to moderate hearing loss

Williams Sound NKL 001 Induction Neckloop for T-Switch Hearing Aids

The Williams Sound NKL 001 is an induction neckloop designed to magnetically couple an audio signal to a telephone coil-equipped (T-Switch) hearing aid. The neckloop has a standard 1/8″ mini plug that can be connected to any audio device that has an 8-16 Ohm 1/8″ output, such as a beltpack receiver, TV, tape player, etc. The neckloop has a slider so you can adjust the tension, and the 18″ cord provides a good amount of slack for use with body-worn devices.

Integrated safety breakaway device
Cord Length: 18″
Adult size
Connector: 1/8″ mono plug
Monoaural
Impedance: 8 to 16 Ohms
Recommended for FM receivers and select IR receivers
For individuals with moderate to severe hearing loss

Williams Sound IDP008 – ADA Wall Plaque for Hearing Assistance

The IDP008 from Williams Sound is a self-adhesive wall plaque that alerts your patrons to the fact that your establishment has a hearing assistance system. Perfect for theaters, auditoriums, and more, the plaque is large and easy-to-see.

If you have questions about this product, contact us at sales@zsyst.com or give us a call at (952)974-3140.

For more products, visit our shop!

The post Williams Sound FM ADA KIT 1 FM ADA Compliance Kit – OPEN BOX appeared first on Z Systems, inc..

Clear-Com CZ11513 4-UP HME DX210 Intercom System with HS15 Intercom Headsets

John Zdechlik — Wed, 18 Dec 2019 16:30:58 +0000

The Clear-Com CZ11513 is a “4-Up” (up to 4 users) HME DX210 system that features 5 (five) HS15 headsets, a BS210 license-free base station w/2 antennas and 115/230 VAC power supply with 115 VAC power cord, 4 BP210 Beltpacks with 8 BAT41 batteries and 4 pouches, an AC40A Battery Charger with 115/230 VAC power supply, 115VAC power cord, and manual. Pretty much everything you’ll need to get your production up and running smoothly. And since we are all aware that no production comes off without a hitch all the more reason to have a solid and stable comm system for the entire production crew.

The HME DX210 offers the perfect blend of wireless intercom performance, system compatibility with wired intercom systems, and ease of use. Operating in the 2.4GHz band, the DX210 delivers exceptional sound clarity and enables interference-free communication for highly demanding productions.

The HME DX210 is a newly-designed, two-channel intercom system that has advanced the capabilities of the legendary DX200. The DX210’s wired intercom interface is now compatible with Clear-Com’s or RTS’ 2-wire systems, and provides two separate 2-wire and 4-wire interconnections. In single channel mode, the powerful 1RU base station supports up to 16 full-duplex and 44 half-duplex beltpacks and/or wireless headsets by linking four base stations. The DX210 is paired with the rugged BP210 beltpack and All-in-One WH210 Wireless Headset COMMUNICATORs, which have two intercom buttons (IC1/IC2) with ISO. The system is also backward compatible with the DX200 COMMUNICATOR models such as BP200, and WH200.

Features:
5 (five) CC-15 headsets – 4 shown in pic, a 5th one is added for the base station user
BS210 license-free base station w/2 antennas.
115/230 VAC power supply with 115 VAC power cord.
4 (four) BP210 Beltpacks
8 (eight) BAT41 batteries
4 (four) pouches
AC40A Battery Charger with 115/230 VAC power supply, 115VAC power cord
Manual

The post Clear-Com CZ11513 4-UP HME DX210 Intercom System with HS15 Intercom Headsets appeared first on Z Systems, inc..

Allen & Heath SQ-5 48-Channel / 36-Bus Digital Mixer with 16+1 Motorized Faders

Corey Arntson — Tue, 19 Nov 2019 16:10:36 +0000

The Allen & Heath SQ-5 is a 48-channel, 36-bus digital mixing console well suited for live sound, corporate A/V, recording studios, and houses of worship. The SQ-5 features 16+1 motorized faders and 16 professional-quality microphone preamps. There are also eight stereo FX engines with dedicated return channels and access to the RackExtra FX library. The mixer’s 12 stereo outputs (configurable as groups or auxes) are well suited for in-ear-monitor setups, while the Auto Mic Mixing function offers quick and easy operation over multiple microphones for conferences, panel talks, and more.

At the heart of the SQ-5 lies the 96 kHz XCVI Core FPGA engine, which delivers professional, high-resolution audio quality, ultra-low latency (less than 0.7 ms), variable bit depth for precision and noise performance, mix coherency down to the sample, and the power to handle high channel / mix counts and ample FX processing. The SQ’s DEEP processing architecture allows you to hand-pick boutique compressor and preamp emulations and embed them directly within the mixer’s inputs and mix channels, all without adding system latency or setup hassles.

The front panel is centered around the mixer’s 7″ capacitive touchscreen and framed by an array of high-grip, illuminated encoders, which offer clear visual feedback and quick, hands-on control. You can drag-and-drop channels and mixes to any strip with custom naming and color coding on the strip display, allowing you to build a mix environment that mirrors your workflow. The SQ-5 offers softkeys, which can be freely assigned to any function for a customized and advanced workflow. The on-board recorder uses a USB Type-A port to record stereo and multitrack sessions to a flash drive. The recorder can also playback stereo and multitrack files, making it well suited for virtual sound checks and studio mixing.

If you have questions about this product, contact us at sales@zsyst.com or give us a call at (952) 974 3140

For more products, visit our shop!

The post Allen & Heath SQ-5 48-Channel / 36-Bus Digital Mixer with 16+1 Motorized Faders appeared first on Z Systems, inc..